Publicidad
Idiomas disponibles
Idiomas disponibles
Round Burner head / caps
FULL_RANGE TOP_DTT48T960GS_DG68-01474A-01_EN+MES+CFR.indb 41
FULL_RANGE TOP_DTT48T960GS_DG68-01474A-01_EN+MES+CFR.indb 41
3. Match the burner caps to the burners
by size, and then re-install the caps on
the burner heads.
CAUTION
Each cap fits on a specific burner head.
Verify that each cap is installed and lies
flat on the correct head.
1. Put the burner heads on the burner
bases as shown on the left. The bottom
of the burner head fits inside the top of
the burner base.
2. Turn the head until it drops into place.
Twist each head clockwise and counter-
clockwise slightly to make sure it is
properly seated.
3. Place the burner caps (brass or
porcelain) atop the burner rings. The
ridge around the bottom of each cap
fits around the top of the ring.
CAUTION
Verify that all burner components rest
securely in place. If any components
are misaligned, disassemble them, and
redo the installation for any improperly
installed components.
English 41
2023-04-25 오후 6:03:40
2023-04-25 오후 6:03:40
Publicidad
