Canon imageRUNNER ADVANCE 500i Guía De Inicio página 15

Avoid locations that are subject to vibration.
●
For example, avoid installing the machine on
unstable floors or stands.
Avoid exposing the machine to rapid changes in
●
temperature.
If the room in which the machine is installed is cold
but rapidly heated, water droplets (condensation)
may form inside the machine. This may result in a
noticeable degradation in the quality of the copied
image, the inability to properly scan an original, or
the copies having no printed image at all.
Avoid installing the machine near computers or
●
other precision electronic equipment.
Electrical interference and vibrations generated by
the machine during printing can adversely affect
the operation of such equipment.
Avoid installing the machine near televisions,
●
radios, or similar electronic equipment.
The machine might interfere with sound and picture
signal reception.
Insert the power plug into a dedicated power outlet,
and maintain as much space as possible between
the machine and other electronic equipment.
Contact an authorized Canon dealer if
●
communication is unavailable.
Depending on your locale or your telephone
connection, you may be unable to perform data
communication. In this case, contact your local
authorized Canon dealer.
Do not remove the machine's leveling feet.
●
Do not remove the machine's leveling feet after the
machine has been installed.
If you put weight on the front of the machine while
the drawers or units within the machine are pulled
out, the machine may fall forward. To prevent this
from happening, make sure that the machine's
leveling feet are in place.
Select a Safe Power Supply
Plug the machine into a 220 - 240 V AC outlet.
●
Make sure that the power supply for the machine
●
is safe, and has a steady voltage.
Do not connect other electrical equipment to
●
the same power outlet to which the machine is
connected.
Do not connect the power cord to a multiplug
●
power strip, as this may cause a fire or electrical
shock.
The power cord may become damaged if it is
●
stepped on, affixed with staples, or if heavy
objects are placed on it. Continued use of a
damaged power cord can lead to an accident, such
as a fire or electrical shock.
The power cord should not be taut, as this may
●
lead to a loose connection and cause overheating,
which could result in a fire.
If excessive stress is applied to the connection part
●
of the power cord, it may damage the power cord
or the wires inside the machine may disconnect.
This could result in a fire. Avoid the following
situations:
• Connecting and disconnecting the power cord
frequently.
• Tripping over the power cord.
• The power cord is bent near the connection part,
and continuous stress is being applied to the
power outlet or the connection part.
• Applying excessive force on the power plug.
Installation Location and Handling
07