11
Pull the two orange rings out, and
remove the protective cover.
12
Holding the tab and the part with the
blue marking, slowly insert the drum
unit until it stops.
When inserting the drum unit, make sure that
the drum unit slides properly along the rails on
the machine.
13
Lock the drum unit by turning the
drum unit lock lever
stops.
*: Drum Unit Lock Lever
52
Replacing the Drum Unit
clockwise until it
*
14
Remove the cap from the container
opening and attach it to the protrusion
on the side of the container.
IMPORTANT
Be careful not to spill the waste toner when
detaching the cap.
15
Insert the waste toner container.
16
toner container lock lever
Turn the
clockwise 90 degrees to lock the
container.
*: Toner Container Lock Lever
*