Canon imageRUNNER ADVANCE 500i Guía De Inicio página 39

10
Registering Your Machine's Fax
Number
This section describes how to register the fax
number your machine uses when sending
faxes. This number is printed on the document
that you fax to the receiving party.
1. Enter the fax number → press [Next].
11
Registering the Unit Name
The unit's name appears on the receiving
party's fax machine, or is printed on the
received document as the Sender Name. You
can register the name of your company or
department as the unit name.
1. Press [Set] → enter the unit name → press
[Next].
12
Setting the Line Type
You can set the phone line type to use for
sending.
1. Select the line type → press [OK].
13
Specifying the System Manager
Settings
You can register the System Manager
Information settings.
1. Change the authentication information →
press [Next] → enter information if necessary
→ press [OK].
Using the Setup Guide to Configure the Machine
▼
31