Canon imageRUNNER ADVANCE 500i Guía De Inicio página 88

damaged, this could cause current to leak,
resulting in a fire or electrical shock .
IMPORTANT
Leave sufficient space around the power plug so
that it can be unplugged easily. If objects are placed
around the power plug, you will be unable to
unplug it in an emergency.
Handling
• Do not attempt to disassemble or modify the
machine . There are high-temperature and
high-voltage components inside the machine
which may result in a fire or electrical shock .
• If the machine makes strange noises, or gives off
smoke, heat, or strange smells, immediately turn
OFF the main power switch, and disconnect the
power cord from the power outlet . Then, contact
your local authorized Canon dealer . Continued use
of the machine in this condition may result in a fire
or electrical shock .
• Do not use highly flammable sprays near the
machine . If gas from these sprays comes into
contact with the electrical components inside the
machine, it may result in a fire or electrical shock .
• To avoid damage to the power cord and creating a
fire hazard, always turn OFF the main power
switch, and unplug the interface cable when
moving the machine . Otherwise, the power cord
or interface cable may be damaged, resulting in a
fire or electrical shock .
• Make sure that the power plug is firmly inserted
into the power outlet if the machine was moved .
Do not use the machine while the connection is
loose, as doing so may cause a fire .
• Do not drop paper clips, staples, or other metal
objects inside the machine . Also, do not spill
water, liquids, or flammable substances (alcohol,
benzene, paint thinner, etc .) inside the machine . If
these items come into contact with a high-voltage
area inside the machine, it may result in a fire or
electrical shock . If these items are dropped or
spilled inside the machine, immediately turn OFF
the main power switch, and disconnect the power
cord from the power outlet . Then, contact your
local authorized Canon dealer .
80
• Do not place heavy objects on the machine, as
they may tip over or fall resulting in personal
injury .
• Close the feeder gently to avoid catching your
hands, as this may result in personal injury .
• Do not press down hard on the feeder when using
the platen glass to make copies of thick books .
Doing so may damage the platen glass and result
in personal injury .
• Do not touch the finisher while the machine is
printing, as this may result in personal injury .
• Paper that has just been output from the machine
may be hot . Be careful when removing or aligning
paper from the output tray . Touching paper right
after it is output may result in low-temperature
burns .
• Do not place your hands, hair, clothing, etc ., near
the exit and feed rollers . Even if the machine is not
in operation, your hands, hair, or clothing may get
caught in the rollers, which may result in personal
injury or damage if the machine suddenly starts
printing .
• Do not place your hands in the part of the tray
where stapling is performed (near the rollers)
when a finisher is attached, as this may result in
personal injury .
Staple Finisher-R1
• Do not insert your hand into the machine while
the paper drawer is removed, as this may result in
personal injury .