Canon imageRUNNER ADVANCE 500i Guía De Inicio página 83

Legal Notices
Product Name
Safety regulations require the product's name to be
registered. In some regions where this product is sold,
the following name(s) in parenthesis may be registered
instead.
• imageRUNNER ADVANCE 500i/400i (F190400)
EMC requirements of EC Directive
This equipment conforms with the essential EMC
requirements of EC Directive. We declare that this
product conforms with the EMC requirements of EC
Directive at nominal mains input 230 V, 50 Hz although
the rated input of the product is 220 to 240 V, 50/60 Hz.
Use of shielded cable is necessary to comply with the
technical EMC requirements of EC Directive.
Laser Safety
This Product is certified as a Class 1 laser product under
IEC60825-1:2007 and EN60825-1:2007. This means that
the product does not produce hazardous laser
radiation.
Since radiation emitted inside the product is
completely confined within protective housings and
external covers, the laser beam cannot escape from the
machine during any phase of user operation.
Do not remove protective housings or external covers,
except as directed by the equipment's manual.
Additional Information
When servicing or adjusting the optical system of the
product, be careful not to place screwdrivers or other
shiny objects in the path of the laser beam. Also,
accessories such as watches and rings should be
removed before working on the product.
The reflected beam, even though visible or invisible,
can permanently damage your eyes.
The label shown below is attached to the paper
drawer's right cover and toner supply port cover.
This Product has been classified under IEC60825-
1:2007 and EN60825-1:2007, which conform to the
following classes;
CLASS 1 LASER PRODUCT
LASER KLASSE 1
APPAREIL Á LASER DE CLASSE 1
APPARECCHIO LASER DI CLASSE 1
PRODUCTO LÁSER DE CLASE 1
APARELHO A LASER DE CLASSE 1
LUOKAN 1 LASER-TUOTE
LASERPRODUKT KLASS 1
Use of controls, adjustments, or performance of
procedures other than those specified in the
manuals for this machine may result in hazardous
radiation exposure .
International ENERGY STAR Program
As an ENERGY STAR® Partner,
Canon Inc. has determined that
this machine meets the
international ENERGY STAR
Program for energy efficiency.
The International ENERGY STAR
Office Equipment Program is an
international program that promotes energy saving
through the use of computers and other office
equipment. The program backs the development and
dissemination of products with functions that
effectively reduce energy consumption. It is an open
system in which business proprietors can participate
voluntarily. The targeted products are office
equipment, such as computers, displays, printers,
facsimiles, and copiers. The standards and logos are
uniform among participating nations.
75