Descargar Imprimir esta página

LAVAZZA WEGA BLUE LB 4722 Manual De Uso Y Mantenimiento página 44

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 115
Data and CE marking
2.8
The machine's technical data is shown in the follow-
ing table:
Model
LB 4722 LB 4723 LB 4724 LB 4733 LB 4734
No. of groups
2
120 V UL
230 V UL
Power
220/240 V 3650 W 2750 W 3650 W
380/415 V 3650 W 2750 W 3650 W
W
745 mm 565 mm 745 mm 565 mm 745 mm
Dimen-
D
525 mm 475 mm 475 mm 475 mm 475 mm
sions
H
585 mm 585 mm 585 mm 585 mm 585 mm
Safety valve calibration
Heating unit operating
pressure
Mains water pressure
Coffee dispensing
pressure
Working environment
temperature
Sound pressure level
According to Directive 2006/42/EC, the machine bears
a CE marking, meaning that the Manufacturer declares,
under his own responsibility, that the unit is safe for
people and property.
The CE nameplate which provides the identification
data is affixed to the base of the frame, under the drain
tray. Below is an example of a nameplate:
MARCHIO COMMERCIALE
WEGA MACCHINE PER CAFFÈ S.r.l.
Via C. Bardini,1 SUSEGANA (TV) - ITALY
Tel. +39.0438.1799700 Fax +39.0438.1884890
S/N:
V
When contacting the Manufacturer, always provide
the following information:
S/N - machine serial number;
Mod. - machine model
Y - year of manufacture;
The appliance data can also be found on the label
located on the machine's packaging.
It is forbidden to remove or damage the nameplate. If this occurs,
replace it as a matter of urgency, dealing exclusively through the
Manufacturer.
44
176
of
1
2
1
1900 W
0.19 MPa (1.9 bar)
0.09 - 0.11 MPa (0.9 - 1.1 bar)
0.15 - 0.6 MPa max. (1.5 - 6 bar max.)
0.9 MPa (9 bar)
5 - 40°C
< 70 dB
Mod.
Y
Hz
W
MADE IN ITALY
2
3750 W
3.
STORAGE
The machine is stored by the Manufacturer or the
Distributor.
4.
INSTALLATION
The machine must only be installed by one of the
Manufacturer's Qualified Technicians.
When the machine is being installed, the Qualified Technician must
replace the water in the hydraulic circuits.
The machine's support base must be perfectly level and have no
irregularities.
The electric system must be equipped with a suitable 30 mA
residual-current device (RCD).
USER Manual
LB4722-LB4723-LB4724 LB4733-LB4734
The CE label is affixed
underneath the drain tray.
The CE label is affixed
underneath the drain tray.

Publicidad

loading