Publicidad
Idiomas disponibles
Idiomas disponibles
Dispensing hot water
6.10
Place the pot under the hot water
spout;
Press the water button
wait for the hot water to be dis-
pensed;
To stop the water dispensing
ahead of time, press either the
hot water dispensing button
again
or the
To programme the hot water, see chapter "7.2 Hot water" on
page 50.
Avoid contact with the hot water nozzle, do not place your hands
or other body parts near the hot water nozzle tips.
USER Manual
LB4722-LB4723-LB4724 LB4733-LB4734
and
button.
7.
PROGRAMMING
The machine is programmed by default. Should the
settings need to be modified, proceed as described in
the following paragraphs:
Coffee doses
7.1
Always programme the right
push-button panel first. This
way, both push-button panels
are automatically programmed.
If necessary, subsequently pro-
gramme the others;
Insert a capsule into the capsule
holder. Make sure to insert the
right capsule into the correct cap-
sule holder (the 1 or 2 spout one);
Attach the capsule holder to the
dispensing group;
Place the cup under the dispens-
ing spout;
Press the
button for at
least 5 seconds until the
button flashes;
Press the desired dose button,
for example
;
To confirm the dose, press the
button again or the
button;
Repeat this operation for the
other dose buttons;
When the programming is com-
plete, press the
until all of the LEDs on the push-
button panel are lit.
Only use "LAVAZZA BLUE" capsules.
Each dose must be programmed with new coffee capsules and not
with previously-used capsules.
The system automatically exits the programming mode 30 seconds
after the last operation was carried out.
Do not remove the filter holder from the dispensing group when
coffee is being dispensed.
Do not insert your fingers or any other objects into the filter holder.
button
49
176
of
Publicidad
