Oerlikon CITOSTEEL 255C Manual De Instrucciones página 15

User Interface PRO (U7)
Figure 6.
34. Display: 7" TFT display shows welding processes
parameters.
35. Left Knob: Sets the value in the top Left corner
of the display. Cancel selection. Return to the
previous menu.
Table 6. Different display veiews
38
39
41
38
39
41
English
40
42
Figure 7.
43
42
Figure 8.
12
36. Right Knob: Sets the value in the top Right
corner of the display. Confirmation of changes.
37. Button: It enables return to main menu.
Users have access to the two different views of interface:

Basic view (Figure 7.)

PRO view (Figure 8)
To choose the view of interface:

Press the Button [37] or Right Knob [36].

Use the Right Knob [36] to highlight the "Configuration" icon.

Press the Right Knob [36] to confirm decision.

Use the Right Knob [36] to highlight "UI look" icon.

Press the Right Knob [36] to confirm decision.

Select one of the view (Basic– Figure 7
or PRO – Figure 8).

Press the button [37] or Left Knob [35]
to retutn to main menu.
38. Status bar.
39. The measured value of
current.
40. The measured value of
voltage.
41. Parameter Value (wire feed
speed or current) regulated by
Left Knob [35].
44 42. Parameter Value (voltage,
trim or power) regulated by
Right Knob [36].
43. Welding Parameter
Visualization.
44. Welding Parameters Bar.
44
Functions of Interface
Components
English