Publicidad
Idiomas disponibles
Idiomas disponibles
f)
To ensure the designed operational integrity of the device, do not remove
factory-installed covers or loosen screws.
g)
When transporting or moving the device from storage to the place of use,
observe the health and safety rules for manual handling applicable in the
country where the device is used.
h)
Avoid situations in which the device stops under heavy loads during operation.
This can cause overheating of the drive elements and consequent damage to
the equipment.
i)
Do not move, shift, or rotate the device while in operation.
j)
Do not leave the device switched on unattended.
k)
Clean the device regularly to prevent permanent dirt build-up.
l)
The product is not a toy. Cleaning and maintenance must not be performed by
children without adult supervision.
m) Do not tamper with the device to alter its performance or design.
n)
Keep the unit away from sources of fire and heat.
o)
Keep body parts away from the hopper, blades and discharge chute when
working with the unit to avoid injury from rotating blades or loaded material
being ejected. Fill the hopper standing at the side of the machine. Do not lean
out or reach out excessively to drop material into the hopper. Risk of losing
balance!
p)
If a piece of wood becomes jammed in the chipper, turn off the unit
immediately and wait for the rotating blades to stop before clearing the
blockage manually.
q)
Do not use the device on uneven, unstable or slippery surfaces. Do not work
on sidewalks, gravel, or other hard surfaces as objects may ricochet and cause
injury.
r)
Do not throw into the hopper pieces of wood with a diameter larger than
recommended. Also, do not overload the device with wood.
s)
The device is designed to work with wooden materials only. Do not feed metal,
rocks, bottles, cans and any other objects other than wood into the unit.
Before throwing them into the hopper, make sure that they do not have hard
elements, e.g. nails. Before starting work, check wind direction. Do not
position the discharge chute against the wind.
t)
For safety reasons, it is recommended that there is a second person who has
been trained in the operation of the device.
u)
The device is designed for outdoor use! It is recommended to use the device
during the day.
v)
If bystanders come close to the workplace, stop working.
w)
If the device makes disturbing noises or vibrates excessively, turn it off and
report the issue to the service center.
x)
Make sure the hopper is empty before starting the machine.
y)
Add oil to the proper level before turning on the machine.
Publicidad
