Publicidad
Idiomas disponibles
Idiomas disponibles
5.2. Connecting the unit
Electrical connection
5.2.1.
The unit should be connected by a qualified person. In addition, a person with the necessary
•
qualifications should check that the earthing and electrical installation including protection
system complies with safety regulations and is functioning properly.
•
Place the unit near the work area.
Avoid excessively long wires to connect the unit.
•
Single-phase welding machines should be connected to an outlet equipped with a grounding
•
pin.
Welders supplied from 3-phase mains are delivered without a plug, you should obtain one
•
yourself and have it installed by a qualified person.
CAUTION! The device may only be operated if connected to an installation with a functional fuse.
Gas connection
5.2.2.
Place the gas cylinders away from the object to be welded and secure them against falling.
•
•
The gas connection of the welding machine must be connected to the gas cylinder or to the
gas supply system with a suitable hose and a regulator with a gas flow control. Caution! It is
not allowed to use network regulators for gas cylinders and vice versa. Such interchange may
result in reducer damage and personal injury.
•
The economical use of gas extends the welding time.
6. Product overview
Front view:
Publicidad
