SIS SIS10.ESY.00 Manual Del Usuario página 48

Cleaning and maintenance
1.35. General rules
•
Keep the display and sensor, and the vehicle on which the system is installed, clean and tidy.
•
Do not perform provisional or urgent repairs on a regular baSIS Easy.
It is very important to follow the maintenance schedule carefully. The device must be checked regularly to prevent malfunctions
occurring.
Maintenance operations must only be performed by qualified personnel.
IMPORTANT
Never clean or service any parts with the vehicle moving.
1.36. Ordinary maintenance of the SIS Easy anti-collision device
Daily (at the start of the shift or before using the vehicle)
•
Check the SIS Easy anti-collision device.
o
The reception/transmission capsules must not be damaged or worn.
o
The CySens sensor must not be covered or obstructed in any way.
o
The guards under the reception capsules must be integral.
•
Check the position of the sensor.
o
The sensor must be perpendicular to the ground, not facing downwards and in its original position. Contact the Fitter
if anything is not right.
Weekly
•
Clean the SIS Easy anti-collision device using a specific detergent. Do not use water.
•
Remove any deposits of dust and dirt from the transmission/reception capsules, taking care not to damage them.
1.37. Extraordinary maintenance
If extraordinary maintenance is required, for instance in the event of a breakdown or malfunction, please contact the Fitter and/or the
Manufacturer.
Pagina 48
MNL.000001 Rev.03 25.09.2019