SIS SIS10.ESY.00 Manual Del Usuario página 49

MNL.000001 Rev.03 25.09.2019
1.38. FAQs
Question: What does it mean if light 4 of the CySens sensor does not flash blue?
Answer: It means it is not operating correctly. Contact the Fitter immediately.
Question: System indicates RED+BLUE status. What can I do ?
Answer : Verify the connection of the sensor cable both on sensor and display side. Verify as well that the cable is not damaged. In
case no problems are detected please contact the fitter/dealer.
Question: Display always indicates GREEN status even if there are obstacles within the range. What can I do ?
Answer: SIS System display is active ONLY when the reverse signal is present. Check the reverse signal connection.
Question: Why does the display show a green alert when light 5 of the CySens sensor is yellow/red?
Answer: The display only shows an alert when the vehicle is in reverse. It remains green when the vehicle moves forward. The
CySens sensor on the other hand signals obstacles in different colours when the vehicle moves forward and in reverse.
Scrapping and disposal
When the SIS1.0 Mini anti-collision device needs to be scrapped, the various materials (metal, plastic, rubber, etc.) must be disposed
of separately. It may be necessary to contact a specialised company authorised to dispose of the parts in accordance with the laws on
the handling of solid urban waste.
Pagina 49