Handling - Kollmorgen AKM1 Manual De Instrucciones

AKM Installation | 2 English

2.2.4 Handling

2.2.4.1 Transport
l
l
l
l
l
l
Transport of motors with a weight of more than 20kg
Lifting eyes must be used to safely transport AKM7 and AKM8 motors (> 20kg). Observe any
transport instructions included in the packaging of the motor.
We recommend the transport tool ZPZM 120/292 for moving the motors.
Suspension Unit ZPMZ 120/292 consists of a beam, suspended to the crane hook and two
double-run chain suspenders.
DANGER
Suspended load. Risk of death if load falls. Never step under the load,
while the motor is raised.
l
l
l
l
34 Kollmorgen | April 2015
Climate category 2K3 according to EN61800-2, IEC 60721-3-2
Temperature: -25...+70°C, max. 20K/hr change
Humidity: rel. humidity 5% - 95% , no condensation
Only by qualified personnel in the manufacturer's original recyclable packaging
Avoid shocks, especially to the shaft end
If the packaging is damaged, check the motor for visible damage. Inform the car rier and,
if appropriate, the manufacturer.
The fastening screws of the lifting eyes must be fully screwed in.
The lifting eyes must be positioned on the supporting surface in an even and flat manner.
Prior to use, check the lifting eyes for secure fitting and any obvious damages (corrosion,
deformation).
Lifting eyes with deformations must not continue to be used.