System Indicators - BD Veritor Plus Analyzer Instrucciones De Uso

BD Veritor™ Plus Analyzer Instructions for Use
3.1.3

System Indicators

The meanings of on-screen displays used on the BD Veritor Plus Analyzer are as follows:
Symbol
Hourglass: An indication that the Analyzer and/or the BD Veritor InfoSync Module subscription are
nearing end of life, either due to usage duration (time) or usage count. In addition to the Hourglass icon,
a descriptive message will appear on the screen after the power-on self-test is complete. The message
describes which end-of-life event is approaching and the remaining usage time or usage count available.
Each end-of-life event generates a unique screen message; insertion of a test device terminates all
messages and immediately initiates a test.
When this symbol is present, the user should contact their BD representative to order a new BD Veritor
Plus Analyzer or renew the BD Veritor InfoSync Module subscription.
The symbol switches from a continuous state to flashing when end of life is imminent.
See section 2.2 - Analyzer Specifications for an explanation of lifetime specifications.
10
Plug: When the Analyzer is properly connected to the facility power supply and powered on, the Plug
If the Plug icon is flashing, it indicates a failure in the battery charging circuit. Contact BD for
assistance. The Analyzer may continue to be used when connected to the facility power supply.
Battery: An indication of battery strength. The maximum battery strength is represented by four bars.
When the battery is nearly discharged, no bars are displayed and the battery outline flashes, indicating
an imminent need for recharge. While the battery is charging, the bars will cycle to indicate charging is
underway. Once the battery is fully charged, the cycling will stop and four bars will appear in a
This symbol only appears on BD Veritor Plus Analyzers that are equipped with the BD Veritor InfoSync
Signal: A representation of the cellular signal strength available to the Analyzer. The maximum strength
is represented by five bars. The antenna symbol flashes when searching for a cellular network.
This symbol only appears on BD Veritor Plus Analyzers that are equipped with the BD Veritor InfoSync
Envelope: An indication that data are either awaiting transmission or are in the process of being
transmitted over the cellular network to the BD Cloud Connectivity Solution service.
Meaning
icon will appear on screen.
continuous state.
Module.
Module.