Emerson AMRHUST LED Manual Del Usuario página 12

3. Ceiling Fan Assembly
3.17
The Fan comes with Black, Blue and White Leads that
are 80" long.
Measure up approximately 6 to 9-inches above top of
Hanger Ball / Downrod Assembly (Figure 15).
Cut off excess Leads and strip back insulation 1/2-inch
from end of Leads.
You have now completed the initial assembly of your
new Ceiling Fan. You can now proceed with hanging
and wiring your Fan.
Please call Emerson
1-800-654-3545 if you have any questions about
installation and operation of this Ceiling Fan.
4. How to Hang Your Ceiling Fan
WARNING
!
The fan must be hung with at least 7' of clearance from
floor to blades (Figure 16).
All manuals and user guides at all-guides.com
technical support at
(Continued)
1/2-INCH
6 TO 9
INCHES
Figure 15
AT LEAST
7'
Figure 16
12
BLUE WIRE
BLACK WIRE
WHITE WIRE
HANGER BALL
CEILING
FLOOR
ETL Model No.: CF880L