Emerson AMRHUST LED Manual Del Usuario página 8

3. Ceiling Fan Assembly
(Continued)
All manuals and user guides at all-guides.com
3.8
Carefully rotate the partial assembled Ceiling Fan and
GREEN GROUND WIRE
place gently into the styrofoam to compete the final
installation of the Fan.
PIN
GREEN GROUND WIRE SCREW
3.9
DOWNROD
Remove the Hanger Ball by loosening the Set Screw in
the Hanger Ball until the Ball falls freely down the
Downrod (Figure 7).
HANGER BALL
Remove the Pin from the Downrod, then remove the
PHILLIPS HEAD SET SCREW (LOOSENED)
Hanger Ball.
Retain the Pin and Hanger Ball for reinstallation in
Figure 7
Step 3.16.
NOTE: Do not loosen the Screw holding the Green
Ground Wire.
3.10
Separate, untwist and unkink the three 80" Motor
THREE 80" MOTOR LEADS
Leads.
(UNTWISTED)
Route the 80" Black, Blue and White Motor Leads
through the Downrod (Figure 8).
4.5" DOWNROD
Figure 8
8
ETL Model No.: CF880L