Emerson AMRHUST LED Manual Del Usuario página 9

3. Ceiling Fan Assembly
3.11
Loosen the two Phillips Head Set Screws in the Motor
Coupler for installation of the Downrod (Figure 9).
Seat the Downrod in the Motor Coupler (Figure 9).
3.12
Align the Clevis Pin holes in the Downrod with the holes
in the Motor Coupler.
Install the Clevis Pin and secure with the Hairpin Clip
(Figure 10).
The Clevis Pin must go through the holes in the Motor
Coupler and Downrod. It is critical that the Clevis Pin in
the Motor Coupler is properly installed and securely
tightened.
WARNING
!
It is critical that the clevis pin in the motor coupler is
properly installed and securely tightened. Failure to
verify that the pin is properly installed could result in
the fan falling.
All manuals and user guides at all-guides.com
MOTOR COUPLER
LOOSEN PHILLIPS
HEAD SET SCREWS
(2)
CLEVIS
PIN
MOTOR COUPLER
Figure 10
9
(Continued)
DOWNROD
Figure 9
DOWNROD
Please contact 1-800-654-3545 for further assistance
HAIRPIN
CLIP
CLEVIS
PIN
HAIRPIN
CLIP
emersonfans.com
ETL Model No.: CF880L