Publicidad
Idiomas disponibles
Idiomas disponibles
6.1
Screw the two Threaded Studs (supplied) into the
tapped holes in the Hanger Bracket (Figure 24).
6.2
Lift the Ceiling Cover up to the Threaded Studs and
turn until Studs protrude through the holes in the
Ceiling Cover (Figure 25).
Secure the Ceiling Cover in place by sliding
Lockwashers over the Threaded Studs and installing
the two Knurled Knobs (supplied) (Figure 25).
Tighten the Knurled Knobs securely until the Ceiling
Cover fits snugly against the ceiling and the hole in the
Ceiling Cover is clear of the Downrod (Figure 25).
WARNING
!
To avoid possible fire or shock, make sure that the
electrical wires are completely inside the outlet box
and not pinched between the ceiling cover and the
ceiling.
6. Final Assembly
All manuals and user guides at all-guides.com
16
Figure 24
Figure 25
HANGER
BRACKET
THREADED
STUD (2)
CEILING
COVER
THREADED
STUDS (2)
LOCKWASHERS (2)
KNURLED
KNOBS (2)
ETL Model No.: CF880L
Publicidad
