6.3
Place the Glass into the opening of the LED Light
Fixture / Lower Housing Assembly, aligning the three
Flat Areas on the top edge of the Glass with the three
raised Dimples on the LED Light Fixture / Lower
Housing Assembly and turn the Glass clockwise until it
stops (Figure 26).
NOTE: Periodically check that the Glass is seated
fully clockwise in the LED Light Fixture / Lower
Housing Assembly.
6. Final Assembly
All manuals and user guides at all-guides.com
(Continued)
LED LIGHT
FIXTURE /
LOWER
HOUSING
ASSEMBLY
FLAT AREA (3)
GLASS
Figure 26
17
Please contact 1-800-654-3545 for further assistance
emersonfans.com
ETL Model No.: CF880L