Publicidad
Idiomas disponibles
Idiomas disponibles
3.1
Position the Fan Blade onto the Blade Flange for
Assembly.
Use three #10-32 x 1/4" Washer Head Screws per
Blade Assembly (Figure 1).
Repeat this procedure for the remaining four Blades
and Flanges.
3.2
NOTE: Take care not to scratch Fan Housing when
installing Fan Blade Assemblies.
Install one Blade Assembly on the Fan Motor Assembly
using two 1/4-20 x 1/2" Pan Head Screws with
Lockwashers (supplied) (Figure 2).
Repeat this procedure for the remaining four Blade
Assemblies.
WARNING
!
To reduce the risk of personal injury, do not bend the
blade flange when installing the blade flanges,
balancing the blades or cleaning the fan. Do not insert
foreign objects in between rotating fan blades.
3. Ceiling Fan Assembly
All manuals and user guides at all-guides.com
5
Figure 1
1/4-20 x 1/2" PAN HEAD SCREW S
WITH LOCKWASHER S
(2 per blade/flange assembly)
BLADE/FLANGE
ASSEMBLY
MOTOR
HOUSING
Figure 2
Please contact 1-800-654-3545 for further assistance
#10-32 x 1/4" WASHER
HEAD SCREWS
(3 per blade/flange)
BLADE
FLANGE
emersonfans.com
ETL Model No.: CF880L
Publicidad
