Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING:
information on the product and in this instruction manual, as well as knowledge of
the project you are attempting. Before use of this product, familiarize yourself with all
operating features and safety rules.
Safety Button (Power Up/Down)
The safety button must be pressed down before starting the auger rotation, self-propel,
handle heating, headlights, and chute/deflector adjustment.
NOTE:
It is not needed to press down the safety button if the power indicator shows
solid green, which means the safety button has been pressed down before.
WARNING:
operation.
Auger-Switch Trigger
Turns the auger motor ON and OFF.
Lock-Off Lever
Helps to prevent accidental and unauthorized activation of the auger-switch trigger. It
must be depressed before the auger-switch trigger can be activated.
Auger-Speed-Control Lever
Adjusts the auger speed which determines the throwing distance.
Self-Propel Trigger
Turns the self-propel function ON and OFF.
Self-Propel-Speed-Control Lever
Increases or decreases the self-propel speed.
Electronic Chute Direction/Pitch Control Handle
◾
Move the handle left or right to rotate the chute to direct the discharged snow as
desired. The handle allows the chute to rotate from 100° left to 100° right.
◾
Move the handle forward or backward to adjust the angle of the chute deflector, which
determines the pitch of the discharge stream and, in part, the throwing distance.
14
56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT2800/SNT2800-FC
The safe use of this product requires an understanding of the
The safety button is a safety device. Never attempt to bypass its
Publicidad
