Publicidad
Idiomas disponibles
Idiomas disponibles
3. Align the grooves in the battery pack with the raised ribs in one of the battery
compartments, and then insert the battery pack into the compartment (Fig. 5a).
4. Push the battery pack until you hear a "click". The battery-release button will spring
up when the battery pack is securely attached.
NOTICE:
Make sure that the latch in the battery compartment(s) snaps into place and
that the battery pack(s) are secured to the unit before starting operation.
5. Attach the other battery pack into the other battery compartment in the same way.
6. To detach the battery pack, depress the battery-release button to release the
battery pack, and then lift it out of the compartment (Fig. 5b).
7. Close the battery compartment cover.
STARTING/STOPPING THE SNOW BLOWER
WARNING:
WARNING:
thrown into your or others' eyes, which can damage eyes severely. Always wear safety
glasses while operating the snow blower or while performing any adjustments or repairs on
the snow blower.
WARNING:
from the snow blower when it is in use.
WARNING:
blower is turned off. Allow the auger to stop rotating before starting it again.
To Power Up the Snow Blower (Fig. 6)
1. Ensure that the handle assembly is
securely adjusted to appropriate height,
the side-discharge chute assembly is
mounted properly.
2. Attach the battery pack(s) to the
snow blower and close the battery
cover. Refer to chapter "ATTACHING/
DETACHING BATTERY PACK".
56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT2800/SNT2800-FC
Do not attempt to override the operation of the safety button.
The operation of a snow blower can result in foreign objects being
Ensure that other people and pets remain at least 100 ft (30 m) away
The auger will continue to rotate for a few seconds after the snow
6
Power Indicator
Safety Button
21
Publicidad
