Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING:
blower will not stop immediately as the wheels will continue to rotate for a while due
to inertia. For your safety, do not release the handles of the snow blower until the snow
blower stops completely.
NOTE:
When the snow blower is pushed forward or pulled backward manually,
squeeze both levers at the same time, then the wheels will be disengaged from the
self-propel motor. This will make the manual moving be easier.
POWER INDICATOR ON THE SNOW BLOWER
The snow blower features a power indicator to communicate the charge level of the
battery pack(s) and the working status of the snow blower. The power indicator will
illuminate only when the snow blower is powered up.
NOTE:
For any faults that could not be solved, contact EGO service center for repair.
POWER INDICATOR MEANING
Solid green
Flashing red
Solid orange
28
56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT2800/SNT2800-FC
When squeezing both levers to stop the self-propel motion, the snow
Snow blower is working
properly and each battery
pack has at least 15% of
its charge.
The battery pack(s)
charge is nearly depleted.
If both the auger-switch
trigger and the self-propel
trigger are activated or
only the auger-switch
trigger is activated,
the auger motor is
overheated.
If only the self-propel
trigger is activated, the
self-propel motor is
overheated.
ACTION
No action needed.
Stop the snow blower and
charge the battery pack(s).
Stop the auger rotation and wait
for some time to cool the auger
motor.
Stop the self-propel function and
wait for some time to cool the
self-propel motor.
Publicidad
