Publicidad
Idiomas disponibles
Idiomas disponibles
5. Tighten the two lower locking knobs to secure the side rails to the rear handle
(Fig. 4b).
4b
Upper Position
ATTACHING/DETACHING
BATTERY PACK (Fig. 5)
Charge the battery pack(s) before first
use!
NOTE:
The snow blower can be powered
by one or two battery packs. Using two
battery packs gives you a longer run
time and efficient power draw managed
by PEAK POWER™ technology. For best
performance, we recommend use of two
5.0Ah or greater Ah battery packs.
When not in use, 56V battery packs
should be stored in an enclosed area
where the temperature will not drop
below -4°F (-20°C). Optimal charging
temperature is between 41°F (5°C) and
104°F (40°C).
WARNING:
battery packs to the snow blower or operate the snow blower until the broken or
missing parts are replaced. Failure to do so could result in serious injury.
1. The battery compartment cover is hinged. Raise the cover by lifting the front of the
cover.
2. The snow blower features dual battery compartment, which allows the use of two
battery packs at the same time.
20
56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT2800/SNT2800-FC
If any parts are broken or missing, do not attempt to attach the
Middle Position
5a
Battery
Compartment
Cover
5b
Battery-
Release
Button
Lower Position
2
1
Publicidad
