Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
WARNING:
Remember that a careless fraction of a second is sufficient to inflict serious injury.
WARNING:
ANSI Z87.1. Failure to do so could result in objects being thrown into your eyes and
other possibly serious injuries.
WARNING:
manufacturer of this product. The use of attachments or accessories not recommended
can result in serious personal injury.
APPLICATION
You may use this product for the purposes listed below:
◾
Removing snow from areas such as driveways and sidewalks.
HANDLE-HEIGHT ADJUSTMENT
(Fig. 4)
WARNING:
starting that could cause serious personal
injury, always remove the battery
pack(s) from the machine when making
adjustments.
The handle assembly can be set to three
different heights. Choose a comfortable operating position according to your height.
1. Loosen the two upper knobs and pull out the two bolts. Save them for reassembly.
2. Loosen the two lower knobs but do not remove them from the side rails during
handle height adjustment.
3. Raise or lower the handle and select the appropriate height determined by one of the
3 hole sets in the side rails (Fig. 4a).
4. Once arriving at the appropriate set of holes, insert the upper bolts and tighten the
upper knobs.
56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT2800/SNT2800-FC
Do not allow familiarity with this product to make you careless.
Always wear eye protection with side shields marked to comply with
Do not use any attachments or accessories not recommended by the
To prevent accidental
4a
Side Rails
Upper Knob & Bolt
Lower Knob & Bolt
19
Publicidad
