Using Av Compu Link; Reference - JVC EX-A1 Manual De Instrucciones

Sistemas de componentes compactos
Ocultar thumbs Ver también para EX-A1:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Using AV COMPU LINK

When the TV set or device to be connected is a
JVC product equipped with the AV COMPU LINK-
II or -III jack, connecting them to the AV COMPU
LINK jack on the system will allow you to control
the other devices by operating one device.
Connection and setting
NOTE
• Refer to "Others" (
COMPU LINK mode.
• Also carefully read manuals of devices to be
connected.
Connection with a TV set
AV COMPU
LINK-II or -III
JVC
JVC-made
TV set
Connection cord
(sold separately)
TV input jack
Video 3
• Connect to the Video 3 (DVD) input jack on your
TV set. If Video 3 is for DV/Movie input, read the
following descriptions:
Connection with a TV set and a VCR
AV COMPU
LINK-II or -III
JVC
JVC-made
TV set
Connection cord
(sold separately)
TV input jack
AV COMPU LINK mode
Video 1
Video 2
• When using with initial settings, connect to Video
3 (if not set to DV/Movie input). Set the remote-
control code to "A".
37
A
page 31) to set the AV
Main unit
Setting of AV COMPU LINK mode
DVD 1
Main unit
Connection cord
(sold separately)
AV COMPU
LINK-II
JVC-made VCR
Remote-control code of VCR
DVD 2
B
A
DVD 3
Connection with a TV set and an AV
amplifier
• Also read manuals of the
AV COMPU
LINK-II or -III
AV amplifier.
JVC
JVC-made
TV set
Connection
cord (sold
separately)
AV amplifier
AV
COMPU LINK
Connection cord
(sold separately)
Input jack of AV amplifier
AV COMPU LINK mode
DVD
NOTE
• Connecting DVD sound output to a sound input jack
for any device other than a DVD disables proper
operation.
• When connecting component video output to a TV
set, change setting of the AV COMPU LINK mode in
this system to "DVD 1". Do not connect to the S-
video jack on the AV amplifier.
Operations
1
Turn on the main power of the
TV set.
2
Insert a disc or videotape into
the source device (the system
or a VCR).
3
Press the play button on the
source device.
• The TV set will be turned on.
• TV input will be switched to external input
(Video 1, 2 or 3) of the source device.
• The AV amplifier will be turned on.
• The source of the AV amplifier will be
switched to the device on which the play
button has been pressed.

Reference

Main unit
DVD 1

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Ca-exa1Sp-exa1

Tabla de contenido