Publicidad
Idiomas disponibles
Idiomas disponibles
•
Ensure the oil container (15) is in place, then turn the oil filtration
control knob (14) to FILTER OIL position to empty the oil reservoir (9)
(see Oil filtration).
•
Place the basket (6) on a clean, flat and heat resistant surface.
Danger of burns!
Ensure the basket (6) cooled down completely before touching
‒
its surface and attempting to remove the basket handle (7).
Ensure the oil cooled down completely before emptying the oil
‒
reservoir (9) into the oil container (15).
•
Remove the basket handle (7) from the basket (6).
•
Remove the control panel assembly (22) from the oil reservoir (9).
Carefully clean the control panel assembly (22) and immersion
heater (21) with a damp cloth.
•
Pull the oil filter cover (11) from the oil reservoir (9) and then remove
the oil reservoir (9) from the housing (13).
•
Open the lid filter cover (29) and remove both black and white
filters (27, 28) (ill. u).
•
Clean the appliance housing (13) with a damp cloth.
•
Wash the lid (3), basket (6), basket handle (7), oil reservoir (9) and
oil filter cover (11) with hot soapy water or in a dishwasher. Rinse
and dry carefully.
•
Dry all parts thoroughly after cleaning and before using the
appliance again.
NOTE:
If the oil container (15) needs to be cleaned, ensure it is empty
‒
before attempting to clean (see Emptying the oil container).
Wash with hot soapy water or in a dishwasher. Rinse and dry
carefully.
Clean the filters (27, 28) every 3 months or after every 12 uses
‒
with hot soapy water. Do not clean in a dishwasher.
Dry all parts and surfaces thoroughly before use. Make sure that
‒
all parts and surfaces are completely dry before connecting the
appliance to a wall outlet. Even a small amount of water can
cause severe splattering of hot oil.
www.KALORIK.com
18
FT 43721 - 210607
Publicidad
