Fronius IG Instrucciones De Instalación página 16

Installing the Fan
14
NOTE! When installing the fan on the mounting fixture, position the fan so that the
arrow symbols on the fan are on the top right-hand side.
(1)
(2)
(3)
(4)
(5) (6) (1) (3) (7)
(9)
Use 2 TX20 screws (2) and (4) to fas-
1
ten fan (1) on mounting fixture (3)
Torque = 1.8 Nm / 1.33 ft. lb.
Insert fan (1) with mounting fixture (3)
2
into the inverter
Use 2 TX20 screws (6) and (7) to fas-
3
ten mounting fixture (3) in place in in-
verter
Torque = 1.8 Nm / 1.33 ft. lb.
Lay the fan cable below PC board
4
LT-AC-SRx
Re-fix cable with 2 cable ties (5) and
5
(8)
(8)
Attach fan cable (9) to PC board IG-
6
DC-DC