Fronius IG Instrucciones De Instalación página 19

(9)
(10)(11)(12) (13) (14)
Position the cover with the display (8)
8
onto the inverter.
Plug the ribbon cable (9) into the inver-
9
ter.
(8)
Install the cover with the display (8).
10
Tighten the four TX25 screws (11),
11 11
(12), (15), and (16).
Tightening torque = 2.5 Nm (1.84 ft. lb).
Switch the AC disconnect (13) and the
12
DC disconnect (14) to the "ON" positi-
on.
Close the cover (10).
13
If present, turn on the external AC and
14
DC disconnect.
(8) (15) (16)
17