Publicidad
Idiomas disponibles
Idiomas disponibles
How to use
English
INTERNAL BUTTONS
1. "ON/OFF" button
* Press this button, and the unit will start or stop, and you can clear the timer or sleep function of the last
time.
2. "MODE" button
Press this button to switch between the following different modes:
AU TO→COOL →DRY→HE AT→FAN
3. "SPEED" button
* Press this button to change the speed:
Lo w
Mi d
Aut o
High
4. TURBO" button
* Activate or deactivate turbo (turbo characters will appear or disappear) by pressing this button in
cooling or heating mode.
* Once activated, the unit will be switched off by default.
* This function cannot be set in auto, dry or fan mode, and the turbo characters will not appear.
5. SILENCE" button
* Activate or deactivate the silence (silence characters will appear or disappear) by pressing this key.
* Once activated, the unit will be muted by default.
6. TIMER" button
* If the unit is on, press this button to deactivate the timer. If the unit is off, press this button to activate
the timer.
* Press this button once, the words H ON/OFF will appear and flash. In that case, press UP/DOWN buttons
to set the time (press UP/DOWN button to change the timer value quickly), the setting time range is from
0.5 to 24 h; press this button once more to set the time, then the remote controller will send the signal
immediately and H ON/OFF will flash.
The remote control will send the signal immediately and H ON/OFF will stop flashing.
* If the time in which the timer button is not pressed in flashing status is longer than 10 seconds, the timer
setting will be abandoned.
* If the timer has been set, press this button one more time to exit the timer setting.
7. HEALTH" button
* Press this button to activate or deactivate the health function.
8. SLEEP" button
* Press the SLEEP button, the indoor unit's sleep indicator light will flash.
The air conditioner will operate in sleep mode for 10 hours and exit "SLEEP" mode to return to the previous
mode.
The unit will turn off automatically if the programmed time runs out.
Note: Press the MODE or ON/OFF button, to activate or deactivate the SLEEP mode.
118
infiniton.es
Publicidad
