Publicidad
Idiomas disponibles
Idiomas disponibles
How to use
Technical specifications
•
Supply voltage range: DC 12V;
•
Mounting hole spacing: 58-62mm;
•
Button: Touch button;
•
Humidity: RH20%-RH90%;
•
Maximum length of communication line: 1000m;
•
Dimensions (W*H*D): 120*120*20mm;
•
Temperature setting: 16ºC-32ºC
Cooling mode
Heating mode
Dehumidifier
Fan
Water heating
Auto mode
1. Power [On/Off].
Press the [ON/OFF] key to turn the unit on and off.
2. Mode Setting
When the unit is in operation, press [MODE/OK Key] , and the operation mode will change according to
the following order:
The initial setting temperature for each mode is 24 ºC, and there is no automatic temperature and fan
setting in FAN mode.
This is only an example, please refer to the actual interfaces shown as final.
3. Temperature setting
When the unit is in operation, press " UP " or " DOWN " to increase or decrease the setting temperature by
0.5ºC OR 1ºC.
4. Fan Adjustment
When the unit is operating, press the [FAN/LEFT] key to change the fan speed in the following order:
4.Fan speed
Auto-->>Low-->Medium-->High-->Super-high-->Auto.
6 fan speeds:
Auto-->LOW-->Med-Low-->Medium-->Med-High-->High-->Super-high-->Auto
Only Low is available in DRY mode, and there is no Auto setting in FAN mode.
Fan speed
Oscillation
Sleep mode
Anti-allergen
iClean
ECO Mode
122
English
Filter
Power limiter
Timer
WiFi
Child lock
Error
infiniton.es
Publicidad
