Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
Right installation
Important notes:
- When unpacking, open the carton, remove the packing foam first, and then take out the air conditioner.
- Do not touch the heat exchanger panel at the back of the indoor unit with your hands or any other ob-
jects.
- Handle the unit with the handle and side angle, please handle it with care. Do not drop the unit or allow
it to fall during transportation.
- When lifting the outdoor unit, please use two straps longer than 8m and insert cushioning material
between the straps and the outdoor unit to avoid damaging the casing.
Preparing accessories for installation
Prior to installation, the following items are not inclu-
ded with the unit, but will be required for installation
and should be obtained locally.
- Four M12 suspension screws
- PVC drain pipe
- Connection pipe
- Thermal insulation materials (PE, thickness greater
than 8 mm) used for the connecting pipe.
- Five large and five small connecting tapes
- Outdoor power cable and indoor and outdoor con-
necting cable
Installation tools
In addition to the common tools, the following
tools will be required during pipe connection:
- Socket spanner (42 N-m, 65 N-m, 100 N-m).
- Pipe cutter (for cutting copper pipes)
- Coolant cylinder (when extending the pipe,
the coolant has to be added)
- Nitrogen cylinder (to prevent oxidation and
clean the pipe when soldering)
- Pressure gauge
- Pipe clamp
- Welding torch
87
English
infiniton.es
Publicidad
