SCHUBERTH E1 Manual Del Usuario página 29

REPLACING THE SUN VISOR
The sun visor can be replaced without tools.
Tip:
To avoid fingerprints and scratches, use a soft, clean cloth
(we recommend a microfibre cloth) to hold the sun visor when
removing or fitting it.
Tip:
Changing the sun visor is easier when the chin section is open and
locked in place. It is also helpful if you place the helmet on a flat
surface or on your lap while seated.
Note:
Try to prevent the sun visor coming into contact with the helmet's inner
shell when removing or fitting it.
Removing the sun visor
1. Open and lock the chin section in
place.
2. Pivot the sun visor down.
3. Bend the middle snap connection with
locating pegs gently outwards until
the sun visor is released from the visor
holder.
4. Repeat this step for the other side.
Tip:
The sun visor holders should remain in the lower position while you
install the visor.
EN
29