SCHUBERTH E1 Manual Del Usuario página 39

VENTILATION DEVICE 5 –
INTERIOR AIR EXTRACTION
The E1 is equipped with an innovative air
extraction system. Fresh air flowing in
through the head vent is directed via the air
channels in the inner shell to the back of the
helmet. The reduced pressure that prevails at
the back of the helmet ensures that the air is
constantly sucked out through the air vents
and special netting material fitted to the neck
pad, thus guaranteeing a pleasant climate
inside the helmet.
VENTILATION DEVICE 6 – MINIMUM
LEVEL OF FRESH AIR
The special shaping of the top of the chin vent
provides the helmet with a guaranteed minimum
ventilation function that ensures a constant supply
of fresh air. The air entering in this way is regulated
so that the rider barely notices it, but it provides an
effective supply of fresh air from a speed as low as
30 kph (provided the helmet is positioned fully in the
air flow when travelling). This function counteracts
any build-up of mist on the visor and any excessive
concentration of CO
2
closed.
, even when the helmet is fully
EN
39