SCHUBERTH E1 Manual Del Usuario página 9

Warning:
Always check your helmet before every ride!
1. Check the face shield and sun visor.
2. Check the correct function of the shield and visor mechanics.
3. Check for cracks in the helmet. Strong acid (e.g. battery acid) can
damage the shield bases. If you find cracks or damage, stop using the
helmet immediately.
4. Check helmet for deterioration. If you find deterioration in any part of
a component, either replace that component or get a new helmet. If
these parts come loose and/or fall off while you are riding, your vision
may be blocked, which could cause an accident resulting in serious
personal injury or death.
5. Check the security of the retention system.
Warning:
Maintain your helmet shields (shield and sun visor) in good
condition!
If your shields become too scratched or uncleanable, replace them with
new ones. Impaired visibility may cause accidents. Clean your shields
only with mild soap diluted in tap water. Rinse well with clean tap water,
and dry with a soft cloth. Never use benzene, gasoline, glass cleaner or
any other solvents.
Do not attach stickers or adhesive tape to the shields, as this will
weaken the hard coating, damaging the shields. Do not drive with a
dim or blurred shield. Impaired vision can cause an accident resulting in
serious personal injury or death.
Warning:
Never use the tinted sun visor at night, in poor visibility
conditions or in tunnels!
The tinted visor reduces light transmission and should never be used
in situations where vision is impaired (i.e. at night, in poor visibility
conditions or in tunnels).
EN
9