Tunturi C85 Crosstrainer Manual Del Usuario página 28

English
Power supply (Fig. E-1)
The trainer is powered by an external power supply.
Refer to the illustration to locate the trainer's power
input.
‼ NOTE
• Connect the power supply with the trainer
before connecting it to the wall outlet.
• Always remove power cord when machine is not
in use.
Console (fig F)
1. Display
2. Tablet/ book support
3. Buttons
⚠ CAUTION
• Keep the console away from direct sunlight.
• Dry the surface of the console when it is covered
with drops of sweat.
• Do not lean on the console.
• Only touch the display with the tip of your finger.
Make sure that your nails or sharp objects do not
touch the display.
‼ NOTE
• The console switches to standby mode when
the equipment is not used for 4 minutes. If the
console is in standby mode, the display shows
the room temperature
All manuals and user guides at all-guides.com
Explanation of buttons
BACK/ STOP
-
-
QUICK START
-
MAIN MENU
-
-
USER SETTING
-
-
MODE/ ENTER
Turn functions
-
-
-
-
-
-
Horizontal
-
-
Vertical
-
-
Press functions:
-
-
-
-
-
-
-
-
External connections
USB port
Usb port can be used for:
-
2 8
Move back to previous window
Stop the active training
Start training without present settings.
All workout information will count up.
It will go back to main menu.
During training, sets console in "end your workout"
mode.
Press this button to enter User/Setting mode screen
This button is of no use during workout
Choose workout mode in main menu
User/setting mode option selection
Choose working item on the setting screen
Increase or decrease the setting value
Adjusting target value (high/low) during workout
Shift up or down during T-Ride™ or T-Road workout
Turning clockwise to choose option rightward.
Turning counter-clockwise for leftward
Turning clockwise to shift up.
Turning counter-clockwise to shift down
Sport mode confirmation
Option confirmation under User/Setting mode
Confirmation of working item on setting screen
Setting value confirmation
Screen switching between BPM-NM or BPM-W
during workout
Screen switching between BPM-M or BPM-FT
during T-Ride™
Screen switching between Video - Profile during
T-Road
Switching to next tutoring mode during T-Trainer™
Service purposes such as software update.
‼ NOTE
• USB format should not be NTFS