Arneg Ginevra 2 Serie Manual De Instalacion Y Uso página 29

8. Technical data
Modello, Model, Modell, Modele, Modelo,
Lunghezza senza spalle, Length without ends, Länge ohne Seiten,
Longeur sans joues, Longitud sin laterales,
Temp. di esercizio, Working temperature, Betriebstemperatur,
Temp. de fonctionnement, Temperatura de trabajo,
Superficie di esposizione orizzontale, Horizontal display surface, Gesamte
Ausstellefläche, Surface d 'exposition horizontale , Superficie de
exposición de apoyo,
* Peso, Weight, Gewicht, Poids, Peso,
Livello di rumorosità , Noise level, Schallpegel, Niveau de bruit, Nivel de
ruido,
Contenuto modificabile senza preavviso, Content that could be change without notice, Inhalt Veränderbar ohne Vorankündigung, Contenu
modifiable sans préavis, Contenido modificable sin previo aviso,
For further technical details, register at www.arneg.it and request the
authorisations to access the reserved area.
9. Transport - specialized technician -
The loading-unloading operations must be performed by qualified personnel capable of
checking the weights, the exact lifting points, and the means most suitable both in
terms of safety and load-bearing capacity. The cabinets come with a frame-platform in
wood fixed to the base for their displacement with forklifts. Use a manual or electrical
forklift suitable to lift the cabinet in question, with a nominal capacity greater or equal to
1000 kg.
Always position the loading forks in the points indicated to avoid the risk of
tipping over, always insert the forks all the way through.
NO persons foreign to operations must be present near the lifting area.
Balance the weight of the unit so as to ensure that the load remains balanced
((Rif. 3)).
DO NOT use lifting means that have:
with a capacity of less than 1,000 kg
unsuitable characteristics or ones altered by use.
invalid or worn out ropes or wires
DO NOT use transportation procedures other than those indicated
10.Storage
DO NOT store the cabinets in uncovered areas and therefore subjected to
atmospheric agents and to direct sunlight. Exposure to ultraviolet rays causes
permanent deformation of the plastic materials and damages cabinet components.
The cabinets must be stored indoors, with a temperature ranging between-25°C
and +55°C and a humidity between 30% and 90%.
Before storing the cabinets, check that the packing is intact and that it does not
display defect that may compromise preservation of the cabinets.
11.Receiving, unpacking, first cleaning - qualified operator -
Before any unpacking operation, adopt all the precautions possible to avoid injuries to
the operator.
The unit may be provided packaged in one of the following ways:
With frame in wood fixed to the base and nylon casing blocked by straps (standard)
(Rif. 5).
05060155 00 28/11/2013
H125
85 105
mm D 1785 D 2185
0°C/+2°C
°C
+2°C/+4°C
2
m 2,24 3,65
kg
db (A)
Ginevra 2
English
H150
85 105
D 1785 D 2185
3,73 4,78
29