English
6
MENU button
First installation
15 cm
15 cm
15 cm
15 cm
15 cm
Use the MENU button to prepare other beverages, such as hot water or
frothed milk. You can also use the MENU button to modify the following
settings:
-
Coffee temperature;
-
Stand-by time: this is the period of time after which the machine enters
stand-by mode;
-
Display contrast;
-
Water hardness: this adjusts the machine settings depending on the
water strength in your area;
-
To enable the "INTENZA+" filter;
-
To start removal of limescale.
Note: This machine has been tested with coffee. Although properly cleaned,
it may show residues of said substance. In any case, we can guarantee that
the machine is brand new.
Remove the machine from the packaging.
For best use, we recommend to:
-
choose a safe and level surface, where there will be no danger of over-
turning the machine or being injured;
-
choose a location that is sufficiently well-lit, clean and near an easily
reachable socket;
-
allow for a minimum distance from the machine sides as shown in the
figure.
Remove the water tank, rinse it and fill it with running water up to the MAX
level. Make sure that the water tank is fully inserted into the compartment.