English
14
Special Beverages and Hot Water
How to Select Special Beverages
Dispensing Hot Water
3 The machine pours in the cup or in the tumbler a preset amount of milk
froth first and then a preset amount of coffee.
Note: press the OK button to interrupt milk or coffee dispensing.
4 After the preparation of coffee and milk-based beverages, the display re-
quests you whether you wish to perform a quick clean of the milk carafe.
This operation can be enabled within 10 seconds (see "Quick Clean of the
Carafe"). This operation can be performed with the carafe containing milk.
It is recommended to perform the quick clean at least once a day. Press
the OK button to confirm or the ESC button to perform the quick clean
later.
1 Press the MENU button and select DRINKS.
2 Press the OK button to confirm.
3 Scroll through the menu and select the preferred beverage.
Warning: when the preparation of hot water starts, the hot water dispens-
ing spout may spray steam and hot water. Before removing the hot water
dispensing spout, wait until the end of the preparation.
1 Insert the hot water dispensing spout.
2 Press the MENU button, select DRINKS, confirm and scroll through the
menu to select "HOT WATER".
Warning: select HOT WATER in the menu just when the hot water dispens-
ing spout is installed.
3 Press the OK button to confirm. The display reminds you to insert the hot
water dispensing spout: press the OK button to confirm. The machine will
start dispensing hot water.
4 To stop hot water dispensing, press the OK button.