Inserting The Milk Carafe; Removing The Milk Carafe; Dispensing Milk-Based Beverages - Gaggia Milano Anima Prestige Instrucciones De Uso

Inserting the Milk Carafe

Removing the Milk Carafe

Dispensing Milk-based Beverages

If installed, remove the water dispensing spout:
1 Press the two side buttons to unlock the dispensing spout and lift it
slightly.
2 Pull the water dispensing spout to remove it.
3 Slightly tilt the milk carafe. Insert it all the way into the guides of the
machine.
4 Push the carafe downwards while rotating it at the same time until it is
locked onto the drip tray.
Do not force the carafe while inserting it.
Rotate the carafe upwards until it is naturally released from the insert in the
drip tray. Then, remove the carafe.
1 Pull out the milk dispensing spout to the right up to the
Note: if the carafe dispensing spout has not been pulled all the way out, milk
may not be properly frothed.
2 Place a cup under the open milk dispensing spout.
3 Choose your milk-based beverage.
- Press the CAPPUCCINO or the LATTE MACCHIATO buttons just once
to prepare immediately one of these two milk-based beverages.
Press the MENU button, select DRINKS, confirm with OK, scroll until
-
selecting MILK FROTH and press the OK button again in order to
dispense frothed milk.
The machine will remind you to install the milk carafe and open the milk
dispensing spout.
English
13
icon.