Intenza+" Water Filter; Intenza+" Water Filter Installation - Gaggia Milano Anima Prestige Instrucciones De Uso

"INTENZA+" Water Filter

"INTENZA+" Water Filter Installation

We recommend that you install the "INTENZA+" water filter as this prevents
limescale build-up in your machine and preserves a more intense aroma of
your coffee.
The "INTENZA+" water filter can be purchased separately.
Water is a crucial part of every coffee, so it is very important to always have it
professionally filtered. Using the "INTENZA+" water filter will prevent mineral
deposits from building up and improve your water quality.
Remove the small white filter from the water tank and store it in a dry place.
Immerse the "INTENZA+" water filter vertically in cold water (with the open-
ing positioned upwards) and gently press its sides to let the air bubbles out.
Set the "INTENZA+" water filter according to the measurements performed
(see "Measuring the water hardness") and indicated on the base of the filter:
A = soft water – equals 1 or 2 small squares
B = hard water (standard) – equals 3 small squares
C = very hard water – equals 4 small squares
Insert the "INTENZA +" water filter in the empty water tank and push it down
to the lowest point.
Fill the water tank with running water and put it back into the machine.
Dispense all the water in the water tank by using the hot water function (see
the "Dispensing Hot Water" chapter).
Then, fill the tank again.
1 Press the MENU and the OK buttons to confirm. Scroll until selecting the
water filter. Press the OK button.
Select ON, then press OK and finally exit from the menu.
2
English
9