f)
Dress properly. Do not wear loose
clothing or jewellery. Keep your
hair, clothing and gloves away from
moving parts. Loose clothes, jewel-
lery or long hair can be caught in mov-
ing parts..
g) If devices are provided for the con-
nection of dust extraction and col-
lection facilities, ensure these are
connected and properly used. Use
of dust collection can reduce dust-
related hazards.
h) Warning! During operation, this electric
tool generates an electromagnetic field
which, under certain circumstances,
may impair the functionality of active
or passive medical implants. To reduce
the risk of serious or lethal injuries, we
recommend that persons with medical
implants consult their doctor and the
manufacturer of their medical implant
before operating the machine.
i)
Change your working position regu-
larly. Long use of the equipment can
result in vibration-related circulatory
disorders in the hands. However, the
length of use can be extended by us-
ing suitable gloves or taking regular
breaks. Note that a personal tendency
for poor circulation, low outdoor tem-
peratures, or high gripping forces dur-
ing work will reduce the length of use.
4) POWER TOOL USE AND CARE
a) Do not force the power tool. Use the
correct power tool for your applica-
tion. The correct power tool will do
the job better and safer at the rate for
which it was designed.
b) Do not use the power tool if the
switch does not turn it on and off. Any
power tool that cannot be controlled with
the switch is dangerous and must be
repaired.
c) Disconnect the plug from the power
source and/or the battery pack from
the power tool
- before making any adjust -ments,
changing accessories, or storing
power tools.
- whenever the user no longer re-
mains in the vicinity of the machine.
- before the removal of blockages.
- before checking, cleaning or work-
ing on the machine.
- after touching a foreign body in order
to check the machine for damage.
- for an immediate check if the ma-
chine begins to vibrate excessively.
Such preventive safety measures re-
duce the risk of starting the power tool
accidentaIly.
d) Store idle power tools out of the
reach of children and do not allow
persons unfamiliar with the power
tool or these instructions to operate
the power tool. Power tools are dan-
gerous in the hands of untrained users.
e) Maintain power tools. Check for mis-
alignment or binding of moving parts,
breakage of parts and any other condi-
tion that may affect the power tool's op-
eration. If damaged, have the power tool
repaired before use. Many accidents are
caused by poorly maintained power tools.
f)
Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less Iikely to bind
and are easier to control.
g) Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to
be performed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
GB
79