Publicidad
Idiomas disponibles
Idiomas disponibles
GB
RESIDUAL RISKS
Even if properly operating and handling this
electric tool, some residual risks will remain.
Due to its construction and build, this electric
tool may present the following hazards:
a) Cuts
b) Ear damage if working without ear
protection.
c) Damage to your health caused by swing-
ing your hands and arms when operating
the appliance for longer periods of time
or if the unit is not held or maintained
properly.
Warning! During operation, this
electric tool generates an electro-
magnetic field which, under certain
circumstances, may impair the
functionality of active or passive
medical implants. To reduce the
risk of serious or lethal injuries,
we recommend that persons with
medical implants consult their doc-
tor and the manufacturer of their
medical implant before operating
the machine.
Safety functions
A
1 Rear grip with hand guard (16)
Protects the hand against branches and
boughs in the case of springing away by
the chain.
3 Chain braking lever/hand guard
Control system, which stops the saw
chain immediately in case of a spring-
back; lever can also be activated manu-
ally; protects the left hand of the opera-
tor if it slides from the front grip.
5 Saw chain with small spring-back
helps you to catch spring-backs with
specially developed control systems.
82
7 Metal stop claw
Reinforces the stability when vertical
cuts are carried out and facilitates
sawing.
10 Switch-on block
The switch-on block must be released
for switching on the device.
11 On-off switch with safety chain brake
On releasing the On/Off switch, the
device immediately switches off.
Operation startup
Always wear protective gloves
when working with the chainsaw
and employ only original parts.
Injury hazard!
Prior to commissioning the device, you
must:
-
assemble the blade and the sawing
chain
-
tension the sawing chain
-
fill it with biological chain oil
-
charge and insert the battery
-
test the oil automatics and the operabil-
ity of the chain brake
Note that the saw can re-oil.
Please note that the saw re-oils after
use and oil may leak out if it is stored on
its side or on the head. This is a normal
process due to the necessary ventilation
opening on the upper edge of the tank and
does not constitute a reason for complaint.
As each saw is checked during production
and tested with oil, a small residue may
be in the tank despite draining, which may
slightly dirty the housing with oil in transit.
Please clean the housing with a cloth.
Publicidad
