Publicidad
Idiomas disponibles
Idiomas disponibles
GB
5) CAREFUL HANDLING AND USE
OF BATTERY DEVICES
•
Charge the batteries only in chargers
that are recommended by the manu-
facturer. Risk of fire if a charger that
is suitable for a specific type of bat-
tery is used with other batteries.
•
In the power tools, use only the bat-
teries designed for the purpose. The
use of other batteries may result in
injuries and risk of fire.
•
Keep the unused battery away from
paper clips, coins, keys, nails, screws
and other small metal objects, which
could cause bridging of the contacts.
A short circuit between the battery
contacts may cause burns or fire.
•
If used incorrectly, liquid may leak
from the battery. Avoid contact with
this. In the event of accidental contact,
rinse off with water. If the liquid gets
into eyes, seek medical assistance.
Leaking battery fluid may cause skin
irritations or burns.
6) SERVICE
a) Have your power tool serviced by a
qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power
tool is maintained.
7) CHAIN SAW SAFETY WARNINGS:
a) Keep all parts of the body away from
the saw chain when the chain saw is
operating. Before you start the chain
saw, make sure the saw chain is not
contacting anything. A moment of
inattention white operating chain saws
may cause entanglement of your cloth-
ing or body with the saw chain.
80
b) Always hold the chain saw with
your right hand on the rear handle
and your left hand on the front
handle. Holding the chain saw with a
reversed hand configuration increases
the risk of personal injury and should
never be done.
c) Wear safety glasses and hear-
ing protection. Further protective
equipment for head, hands, legs
and feet is recommended. Adequate
protective clothing will reduce personal
injury by flying debris or accidentaI
contact with the saw chain.
d) Do not operate a chain saw in a
tree. Operation of a chain saw white
up in a tree may result in personal in
jury.
e) Always keep proper footing and
operate the chain saw only when
standing on fixed, secure and level
surface. Slippery or unstable surfaces
such as ladders may cause a loss of
balance or control of the chain saw.
f)
When cutting a Iimb that is under
tension be alert for spring back.
When the tension in the wood fibres is
released the spring loaded Iimb may
strike the operator and/or throw the
chain saw out of control.
g) Use extreme caution when cutting
brush and saplings. The slender
material may catch the saw chain and
be whipped toward you or pull you off
balance.
h) Carry the chain saw by the front
handle with the chain saw switched
off and away from your body. When
transporting or storing the chain
saw always fit the guide bar cover.
Proper handling of the chain saw will
reduce the Iikelihood of accidentaI
contact with the moving saw chain.
i)
Follow instructions for lubricating,
chain tensioning and changing ac-
cessories.
Publicidad
