Publicidad
Idiomas disponibles
Idiomas disponibles
GB
Maintenance Interval Table
Machine part
Komponenten der
Kettenbremse
Kettenritzel (24)
Saw chain (5)
Guide bar (4)
Guide bar (4)
Automatic oil
system
Storage
•
Clean the equipment before putting it
away.
•
Empty the oil tank before longer peri-
ods of non-use. Dispose of waste oil
environmentally correctly (see „Waste
disposal and environmental protection").
•
Put on saw bar protection sheath.
•
Store the appliance in a dry place well
out of reach of children
•
Before a longer period of storage (e.g.
over winter), remove the battery from
the equipment.
•
Only keep the batteries partly charged.
The charge condition should be 40-
60% during a longer storage period.
•
During a longer storage period, check
the state of charge of the battery and
recharge if necessary roughly every
3 months
•
Store the equipment between 10 °C
and 25 °C. Avoid extremes of cold and
heat during storage, in order to prevent
impairment of battery performance.
92
Action
Check, replace if required
Check, replace if required
Check oil, regrind or replace
if required
Check, clean and oil
Turn around
Check, clean oil aperture if
necessary
Before every
use
Waste disposal and
environmental protection
Remove the battery from the device and
take the device, battery, accessories and
packaging for environmentally friendly
recycling.
Machines do not belong with do-
mestic waste.
•
Before disposal, remove batteries from
the device first.
•
Hand the device and the charger in to
a recycling point.
•
Do not dispose of used oil in the sew-
age system or drains. Dispose of
used oil in an environmentally correct
manner - bring it to a waste disposal
center.
•
Defective units returned to us will be
disposed of for free.
After 10 hours
of operation
Publicidad
