Publicidad
Idiomas disponibles
Idiomas disponibles
GARANT Electronic Torque Tester HCT
de
3.2.
INTENDED USE
For testing indicating torque wrenches and triggering torque wrenches and for general measurement of torques within
the measurement range of the torque analyser.
en
Torques can be applied both clockwise and anti-clockwise.
For work in industrial environments.
Before use, allow the unit 30 minutes residence to acclimatise to room temperature.
bg
Use only when securely mounted as specified.
Check that the device is in perfect functional condition and is safe to operate before use.
da
Use only when it is technically in good condition and safe to operate.
If the device is dropped or collides with other objects, do not use again until it has been thoroughly checked and calib-
rated.
fi
Use only the recommended adapters and connecting shanks.
Have the wrench regularly calibrated and adjusted.
3.3.
REASONABLY FORESEEABLE MISUSE
fr
Do not exceed the specified torques.
Do not open the casing.
it
Do not use in explosion hazard areas.
Not for use where there is exposure to intense heat, direct sunlight, naked flames or liquids.
Do not operate outdoors or in rooms with high atmospheric humidity.
hr
Do not make any unauthorised modifications.
Do not mount components not in accordance with the specification.
Not for testing the torque of power screwdrivers or power wrenches.
lt
Do not use the unit if the electrical or mechanical installation, operation or cleaning is incorrect.
3.4.
PERSONAL PROTECTIVE EQUIPMENT
nl
Comply with the national and regional regulations for safety and accident prevention. Select and provide protective work
wear such as safety shoes and safety gloves appropriate for the risks associated with the intended activities.
3.5.
PERSONNEL QUALIFICATIONS
no
Trained person
Trained persons in the sense of this documentation are persons who have been trained to perform work in the areas of
transport, storage and operation.
pl
Specialists for mechanical work
Specialists in the sense of this documentation are persons who are familiar with assembly work, mechanical installation,
commissioning, troubleshooting and maintenance of the products and who possess the following qualifications:
pt
Qualification / training in the field of mechanics as specified in the nationally applicable regulations.
Trained specialist for electro-technical work
A trained electrician in terms of this document is a person who has been respectively trained and who possesses the skills
ro
and experience to recognise and avoid the dangers of working with electricity.
NOTICE! Not for use by persons less than 14 years of age.
4.
Device overview
sv
4.1.
TORQUE TESTER
sk
A
1
Drive interface
(square socket drive for versions 12, 50 and 350,
sl
external hexagon drive for version 1000)
2
TFT display
es
3
USB-C port (covered)
4.2.
DISPLAY
cs
B
1
Active Bluetooth connection (if Bluetooth is activ-
ated, flashing in pairing mode, only 654410)
hu
2
Fault symbol/message symbol (if there is a fault)
24
4
Send button
5
Attachment hole
6
Control panel
12
Menu
13
Target value
Publicidad
