Garant 654410 Manual De Instrucciones página 25

3 Memory almost at maximum capacity
4 HCT mode activated (only 654410)
5 Direction of rotation for measurement
6 Date
7 Time
8 With set target value:
Torque tester peak value / set target value
Without set target value:
Torque tester peak value / Torque tester max-
imum permissible torque
9 Bar display
10 Light blue: Range between lower and upper tar-
get tolerance
11 White: Current torque
4.3. CONTROL PANEL
C
1 Left function button
2 Left
3 Up
4 Right
Button assignment
Status Left func-
tion button
In "Track" Display the
test mode last five
measure-
ment values
In "Track Display list
HCT" test of available
mode (only HCT devices
654410)
In "1st Peak Display the
& Peak last five
Hold" test measure-
mode ment values
Up Down
- -
- -
- -
14 Active test case
15 Torque unit on torque tester
16 Torque applied on the torque tester
17 Active mode
18 List of available HCT devices (only 654410)
19 Torque unit of tested torque wrench (only
654410)
20 Torque applied on the torque wrench (only
654410)
21 HCT designation of active torque wrench (only
654410)
22 Display last 5 measurement values
5 Right function button
6 Send button
7 Down
8 OK
OK Left
Switch to -
menu.
Longer than
two
seconds:
switch off
Switch to -
menu.
Longer than
two seconds:
switch off
Switch to -
menu.
Longer than
two
seconds:
switch off
Right Right func-
tion button
- Switch to
menu
- Switch to
menu
- Switch to
menu
www.hoffmann-group.com
de
en
bg
da
fi
fr
it
hr
lt
nl
Send but-
ton
no
-
pl
pt
If connected
to HCT
torque
ro
wrench: re-
set peak
value on the
sv
torque
wrench
Start evalu-
sk
ation. Reset
evaluation
and start
sl
new meas-
urement. If
connected
es
to HCT Mo-
bile app or
HCT Win-
cs
dows app:
transfer
value
hu
25