illy Iperespresso X7.1 Instrucciones De Uso página 33

TO HEAT WATER
The steam wand which comes with the machine also dispenses hot water to make teas and infusions.
Make sure the brew button is lit.
Proceed as follows:
Clean any milk residue from the
1
steam wand.
MAKING COFFEE AFTER USING THE STEAM WAND
Never make an espresso immediately after using the steam wand, as the water passing through the thermoblock is too hot for making coffee and will compromise its flavour.
The brew button is disabled when the temperature of the thermoblock is too high.
To return to coffee-maker
1
mode, press the brew button
and wait for the coffee cup
symbol to light up
the cooling phase (about 10
minutes), the large coffee cup
symbol flashes.
Place a metal jug under the
2
steam wand.
To return the machine to cof-
2
fee-maker mode more quickly
(about 1 minute), proceed as
; during follows:
• Place a metal jug under the
steam wand.
EN
Press and hold the steam but-
3
ton for at least 3 seconds.
The wand starts to dispense hot
water and the steam button
flashes rapidly.
Press the steam button
again to stop the wand from
dispensing hot water.
• Press and hold the steam but-
3
ton for 3 seconds.
The steam wand dispenses the
programmed amount of hot
water; the dispenser shuts off
automatically.
33