Publicidad
Idiomas disponibles
Idiomas disponibles
Battery and Charging System
Standby
On
Position
Position
Inserting Battery
1.
L
o
a
d
h t
e
b
t a
e t
y r
c ,
o
n
Nailer.
2. Push battery fully forward into its locked On
position. The battery indicator light will light.
3.
To disengage the battery, push down on locking
tab and slide battery back until it locks into the
Standby position.
4. To remove battery, push down on locking tab and slide
battery out.
CORRECT BATTERY OPERATION
ON/OFF SWITCH. Battery has 2 secure lock positions:
engaged and disengaged
a t
c
s t
fi
s r
, t
n i
o t
h t
e
C
o
d r
e l
s s
Battery Indicator Light
On the right side of the handle is a small plastic lens. This is
the battery indicator light. When you insert a fully-charged
battery into the tool, you will see a blinking green light. If
the indicator light blinks red, recharge the battery.
Battery Indicator
Light
NOTE: If battery is left in tool for an extended period,
the battery will discharge completely and will require
recharging.
Green indicates charged
battery
10
Red indicates battery
needs charging
Publicidad
